Toner Hopper Unit - Konica Minolta Bizhub C350 Service Manual

Other
4.3.28

Toner Hopper Unit

1. Open the Front Door.
2. Remove the Toner Cartridge (C, M, Y, Bk).
3. Remove the IU (C, M, Y, Bk).
NOTE
• After the Imaging Unit has been removed from the main unit wrap it in the light
shielding cloth and store it in a dark place. DO NOT leave the Imaging Unit
exposed to light for a extended period of time as it will become damaged.
[4]
[3]
bizhub C350 Field Service Ver. 2.0 April 2004
6. Remove four screws and the Manual
7. Remove two screws andthe manual
CAUTION
• Install the Manual Bypass Separa-
4030D033AA
8. Remove the C clip, spring, and guide
9. To reinstall, reverse the order of
10. Select "Tech. Rep. Mode"
4030D039AA
4. Remove the Left Front Cover and
☞ 2-41
[2]
5. Remove two Screws [1], and remove
[1]
4036fs2082c0
6. Remove two screws [3] and the Front
4036fs2083c0
2-62
Bypass Transport Cover.
Bypass Separator Fixing Bracket
Assembly.
tor Fixing Bracket while pressing
down so that it coheres to the metal
bracket of the copier.
plate, then, remove the Separator
Roll Assy.
removal
→ →
"Counter" "Life"
clear the counter.
Panel Cover.
the Front Right Cover [2].
Door Switch cover [4].
→
"Bypass" and