Chapter 4. Using The Operator Menu; New Ribbon; Show - Genicom GEK-00027C User Manual

CHAPTER 4. USING THE OPERATOR MENU

Main
Operator

NEW RIBBON

Operator
New Ribbon
New Ribbon
Select to Reset

SHOW

Operator
Show
Show
Software IDs
GEK-00028C
While in Offline state, press the ▼ (down) menu browse key until
Operator menu is displayed in the bottom right corner of the LCD.
Main will be displayed in the upper left corner of the LCD.
To move up or down a level of menu options, press the ▲ (up) or ▼
(down) menu browse keys. To move laterally among options on the
same level, use the ◄ (left) or ► (right) menu browse keys.
Currently selected (active) menu options are displayed in the LCD
with a < symbol, which follows immediately to the right of the menu
option. Some menu options are toggle options and reflect an enabled
or disabled condition. Press the Select key to cause the printer to
perform the operation.
Press the Clear key to return to the upper level menu or to Offline
state when in a first-level menu. Pressing the Clear key also aborts a
menu operation.
When a new ribbon is placed in the printer, the operator can reset
the ribbon counter. This option is only available when Ribbon
Monitor is enabled through the Maintenance Menu. (See "Ribbon
Monitor" on page 143 in Chapter 6 for procedures.)
1. While in the Operator menu, press ▼ (down) to access Select to
Reset. New Ribbon is displayed in the upper left corner of the
LCD and Select to Reset is displayed in the lower right corner.
2. Press the Select key to reset the counter.
This menu option allows the operator to view or print various printer
settings. See the Operator Menu map in Appendix I for a complete
listing of selections available.
1. While in Operator Menu, press the ◄ (left) or ► (right) menu
browse keys until Show is displayed in the lower right corner of
the LCD.
2. Press the ▼ (down) menu browse key to access the show options.
3. Press the Select key to select a show option. The following
describes each selection available.
41
Chapter 4. Using the Operator Menu