Table of Contents
Advertisement
PRINT MODULE ACCESS
5180 User's Manual
5. Reach up behind the paper handling assembly and remove the
two yellow rear shipping blocks. A screwdriver can be used to
help loosen the blocks.
The yellow front shipping block is removed from the topside of
the printer.
LOWER
PAPER
HANDLING
ASSEMBLY
AREA
Figure 2-5 Shipping Block Bolts
6. Open the top access door. See Figure 2-4.
7. Unscrew the two print module access panel screws (Figure 2-6)
and tilt the print module access panel up towards the front of the
printer.
PANEL SCREWS
Print Module Access Panel
8. Remove the yellow front shipping block. A screwdriver can be
used to slide the block free. See Figure 2-7.
Note
YELLOW FRONT
SHIPPING BLOCK
BOLT
YELLOW REAR SHIPPING BLOCKS AND
BOLTS ARE LOCATED UP BEHIND THE
PAPER HANDLING ASSEMBLY
PRINT MODULE
ACCESS PANEL
Figure 2-6
8
GEK-00028C
Advertisement
Table of Contents
Troubleshooting
