Save Format - Genicom GEK-00027C User Manual

Save Format

Format
Save Format
Save Format
Default
GEK-00028C
This is the final step used to modify or create a stored format. (See
"Format" for additional information.) This menu is used to save the
format settings created after selecting and modifying a format. When
saving a format, the operator is given the choice to save the format to
the active (the format chosen from the control panel) or as a blank
format, if available. There are ten possible customer-defined format
slots available. It is recommended that each customer-defined format
be saved with a unique name.
Print a Format Page printout and save for future reference or in
the event a format(s) needs to be re-configured. See "Show" in
Chapter 4, page 41, for instructions to print a Format Page.
1. While in Format menu, press the ◄ (left) to ► (right) menu
browse key until Save Format appears in the lower right corner of
the LCD.
2. Press the ▼ (down) menu browse key. Save Format will appear in
the upper left corner of the LCD.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
format is listed. If no previously saved format name exists, the
default format names are Default through Blank Format 1 ... 9.
4. Press the Select key to select the format slot. Choosing a blank
format will immediately display the format name modified under
Format Name.
5. Press the Select key to confirm this format name. Press the Clear
key to exit this option.
Note
69
Chapter 5. Using the Set Up Menu