Nl At Mpp+1; Ff Data - Genicom GEK-00027C User Manual

NL at MPP+1

Coax Compat
NL at MPP+1
NL at MPP+1
LN+2<

FF Data

Coax Compat
FF Data
FF Data
Col 1<
5180 User's Manual
This enables/disables a NL at MPP+1 (New Line at Maximum Print
Position + 1). If NL at MPP+1 is set to LN +2, a new line is executed at
MPP +1, and additional new line is executed automatically, the next
print position will be in column 1 and down 2 lines. If set to NL, no
additional new line is executed at MPP+1, and the next print position
will be on column 1 of the next line.
1. While in the Coax Compat menu, press the ◄ (left) or ► (right)
menu browse keys until NL at MPP+1 is displayed in the lower
right corner of the display.
2. Press the ▼ (down) menu browse key to access the NL at MPP+1
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
This enables/disables FF Data (Form Feed Followed by Data). The FF
Data option is used to select the action taken if a form feed is
received by the printer and it is not the last character in the IBM
print buffer. When set to COL 2, the current print position after the
form feed will be the second column on line one of the next form. If
set to COL 1, the current print position will be the first column on
line one of the next form.
1. While in the Coax Compat menu, press the ◄ (left) or ► (right)
menu browse keys until FF Data is displayed in the lower right
corner of the display.
2. Press the ▼ (down) menu browse key to access the FF Data
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
120
GEK-00028C