Pseries; Dec Ppl3 - Genicom GEK-00027C User Manual

Pseries

Emul Settings
Pseries
Pseries
Options
PSeries
01

DEC PPL3

Emul Settings
DEC PPL3
DEC PPL3
Options
DEC PPL3
01
5180 User's Manual
This menu configures the the Pseries emulation. See the Printronix
Pseries table on page 187 in Appendix G for additional information.
Under the menu option SFCC (Special Function Control
Character), the user may define a SFCC character. See the
Programmer's Manual for additional information.
1. While in the Emul Settings menu, press the ◄ (left) or ► (right)
menu browse key until Pseries is displayed in the lower right
corner of the LCD.
2. Press the Select key to access the settings for Pseries. Pseries will
be displayed in the upper left corner of the LCD and Options will
be displayed in the lower right corner.
3. Press the Select key to access the options menu.
4. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable a
Pseries setting. The < symbol will immediately follow an enabled
setting.
5. Press the Clear, or ▲ (up) menu browse key to exit this option.
This menu configures the DEC PPL3 emulation. See the DEC PPL3
table on page 187 in Appendix G for additional information.
1. While in the Emul Settings menu, press the ◄ (left) or ► (right)
menu browse key until DEC PPL3 is displayed in the lower right
corner of the LCD.
2. Press the Select key to access the settings for DEC PPL3. DEC
PPL3 will be displayed in the upper left corner of the LCD and
Options will be displayed in the lower right corner.
3. Press the Select key to access the options menu.
4. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable a
DEC PPL3 setting. The < symbol will immediately follow an
enabled setting.
5. Press the Clear, or ▲ (up) menu browse, key to exit this option.
Note
128
GEK-00028C