Right Margin - Genicom GEK-00027C User Manual

Modify Format

Right Margin

Right Margin
By IN
Right Margin IN
00.0
Right Margin IN
00.0
GEK-00028C
Right Margin
This menu option is used to set the right margin. The right margin
may be set By Inches or By Column.
1. While in Modify Format menu, press the ◄ (left) or ► (right) menu
browse keys until Right Margin is displayed in the lower right
corner of the LCD.
2. Press the ▼ (down) menu browse key to access the Right Margin
options. Right Margin will be displayed in upper left corner of
LCD.
3. Press ◄ (left) or ► (right) menu browse key and select By IN or By
Column. Press the Select key to select one of these options. The
current setting is displayed in the lower right corner of the LCD.
4. Press the Select key again to modify the setting. Notice the cursor
(underline) is now shown under the first digit. The four menu
browse keys revert to data entry operation. The horizontal ◄ ►
(left or right) keys position the cursor (underline) to the digit to be
changed; the vertical ▲ ▼ (up or down) keys
increment/decrement the selected digit by one.
5. Press the Clear key after all changes are complete and the
desired value is displayed in the lower right corner of the LCD.
Pressing the Clear key does not erase the values entered, but does
allow the user to exit the User Set menu.
Repeat this section if further changes are necessary.
Note
57
Chapter 5. Using the Set Up Menu