Chapter 5. Using The Set Up Menu; Format - Genicom GEK-00027C User Manual

CHAPTER 5. USING THE SET UP MENU

Main Menu
Set Up

FORMAT

5180 User's Manual
The Set Up menu allows the operator to modify or create stored
formats. The Set Up menu also allows the operator to set default
settings for Horiz Tab, Vertical Format, Interface Settings, Engine
Options, Print Control, GenPtrOpts (General Printer Options),
TearOff, Emulation, Display Lang (Display Language) and Filter. See
Appendix I for the complete Set Up Menu Map.
While in the Offline state, press the ▼ (down) menu browse key until
Set Up menu is displayed in the bottom right corner of the LCD. Main
Menu will be displayed in the upper left corner of the LCD.
To move up or down a level of menu options, press the ▲ (up) or ▼
(down) menu browse keys. To move laterally among options on the
same level, use the ◄ (left) or ► (right) menu browse keys.
Currently selected menu options are displayed in the LCD with a <
symbol, which follows immediately to the right of the menu option.
Some menu options are toggle options and reflect an enabled or
disabled condition. Press the Select key to cause the printer to
perform this operation.
Press the Clear key to return to the upper level menu or to Offline
when in a first-level menu.
This menu option allows the operator to change or create and store
format settings for the printer. (See Set Up menu map in Appendix I
for available selections.
There are two steps to changing or creating a stored format.
1. Modify the format. (See "Modify Format" for procedures and
menu options.)
2. Save the format. (See "Save Format" for procedures and menu
options.)
50
GEK-00028C