TEST PATTERN
Operator
Test Pattern
DISCARD JOB
GEK-00028C
Selecting this option will print a test pattern until the operator
presses the Clear key to stop. This option can be used to verify
printing occurs at the top of form. See "Test Pattern Printing" in
Chapter 2 for additional information.
This menu option is used to clear the printer's buffer.
1. While in the Operator menu, press the ◄ (left) or ► (right) menu
browse key until Discard Job is displayed in the lower right corner
of the LCD.
2. Press the Select key to discard the job (clear the buffer) in the
printer.
49
Chapter 4. Using the Operator Menu