Soft Faults - Genicom GEK-00027C User Manual

Soft Faults

5180 User's Manual
When a soft fault occurs, printing stops, and operator intervention is
required.
Some change in the data being sent to the printer may be required
(See Programmer's Manual).
If a wire driver or print head actuator fails, (see the first two displays
in Table 7-1), printing may continue without damage to the printer
(see the section on print head replacement).
Press the CLEAR key to clear the display.
Either Online or Local will be displayed in upper left corner of the
display window. The following fault messages will be displayed in the
lower right corner of the display window:
150
GEK-00028C