Description Of The Control Panel - Genicom GEK-00027C User Manual

DESCRIPTION OF THE CONTROL PANEL

GEK-00028C
The control panel is mounted in the top of the printer and is
accessible with the top cover either open or closed. The Control Panel
utilizes a display panel composed of two rows of sixteen characters
each.
With the top cover open, the control panel on the 5180 (52 dBa)
Cabinet Model will move around slightly to the touch. This is normal.
The floating mount allows the panel to align itself when the top cover
is closed.
The control panel mount on the 5180 (52 dBa) Cabinet Model is
hinged so that it can be tilted forward to remove the print
module access panel for service.
The basic look and layout of the 5180 (52 dBa) Cabinet Model control
panel is represented by the following:
The four keys to the right of the display are to navigate the menu tree
structure and are referred as menu browse keys. The On Line/Off Line
key is located at the top of the left row of keys. The three keys below
the On Line/Off Line key,↑ (up arrow), ↓ (down arrow), and TOF, are
used to set top of form. See "Setting Top of Form" in Chapter 3 for
additional information. The bottom left key, Format (in conjunction
with the Select key), is used to select one of ten stored form formats.
The FF, Tear Off, and View keys under the display are additional
paper positioning functions. The Clear and Select keys are used in
data entry.
When in the online state, only the FF, On Line/Off Line, Tear Off, &
View keys and limited functionality of the Clear and Select keys are
active. Pressing any other key causes a "beep." The "Processing" LED
indicator is lit whenever data is being received and or being
processed/printed. In multi-source I/O mode, the "Processing" LED
indicator will blink for the duration of the timeout period when
processing is complete.
Note
13
Chapter 2. Getting Started