Modify Format
Font Style
5180 User's Manual
Font Style
This menu option is used to select the font style. (See Set Up Menu
Map in Appendix I for available selections.)
1. While in Modify Format menu, press the ◄ (left) or ► (right) menu
browse keys until Font Style is displayed in the lower right corner
of the LCD.
2. Press the ▼ (down) menu browse key to access the Font Style
options.
3. Press the ◄ (left) or ► (right) menu browse keys until the font
style desired is displayed in the lower right corner of the LCD.
4. Press the Select key to select a Font Style option. The < symbol
will now immediately follow the saved Font Style option.
Code Page/Country
The character map consists of 256 characters (0X00 – 00XFF). Using
the Code Page (0X80-OXFF) and Country (00-7F) options allows the
operator to select the upper and lower ends of the character maps
respectively. Under Code Page/Country, there are two sub-menus,
Code Page and Country. (See Operator Menu Map in Appendix I for
selections available.)
COUNTRY
CODE PAGE
52
GEK-00028C