5180 (55 Dba Cabinet Model) - Genicom GEK-00027C User Manual

5180 (55 Dba Cabinet Model)

GEK-00028C
1. Open the front access door. See Figure 2-4.
STANDARD CABINET
2. To locate the two yellow rear shipping blocks and bolts, enter the
lower area of the printer far enough to look up behind the paper
handling assembly (lower tractors and paper guides.) See Figure
2-5.
3. One yellow bolt is located near the front of the printer and the
other two yellow bolts are near the back wall of the enclosure.
4. Remove the three yellow shipping block bolts from the "ceiling" of
the lower enclosure. See Figure 2-5.
TOP ACCESS
DOOR
FRONT
ACCESS
DOOR
5180 (55 DBA)
Figure 2-4
Access Doors
7
Chapter 2. Getting Started