P 300/600; Dec Lg - Genicom GEK-00027C User Manual

P 300/600

Emul Settings
P 300/600
P 300/600
Options
P 300/600
01

DEC LG

Emul Settings
DEC LG
DEC LG
Options
DEC LG
01
GEK-00028C
This menu configures the Printronix P 300/600 emulation. See the
Printronix P300/600 table on page 187 in Appendix G for
additional information.
1. While in the Emul Settings menu, press the ◄ (left) or ► (right)
menu browse key until P 300/600 is displayed in the lower right
corner of the LCD.
2. Press the Select key to access the settings for P 300/600. P 300/600
will be displayed in the upper left corner of the LCD and Options
will be displayed in the lower right corner.
3. Press the Select key to access the options menu.
4. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable a P
300/600 setting. The < symbol will immediately follow an enabled
setting.
5. Press the Clear, or ▲ (up) menu browse, key to exit this option.
This menu configures the DEC LG emulation. See the DEC LG Plus
table on page 187 in Appendix G for additional information.
1. While in the Emul Settings menu, press the ◄ (left) or ► (right)
menu browse key until DEC LG is displayed in the lower right
corner of the LCD.
2. Press the Select key to access the settings for DEC LG. DEC LG
will be displayed in the upper left corner of the LCD and Options
will be displayed in the lower right corner.
3. Press the Select key to access the options menu.
4. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable a
DEC LG setting. The < symbol will immediately follow an enabled
setting.
5. Press the Clear, or ▲ (up) menu browse key to exit this option.
127
Chapter 5. Using the Set Up Menu