Software Ids; Sample Status Page - Genicom GEK-00027C User Manual

Software IDs

Sample Status Page

5180 User's Manual
This option displays the part or version number of the installed
software. This is a view only option. When selected, the display will
automatically cycle and display information similar to the following
display example:
TTMI: 44A105004
Font: 44A100071
CCU: 44A105086
Panl: 44A119255
XXXY: <Revision Number> *
* XXXY: are board identifiers, where XXX is the option board
installed, Y is the expansion slot number and <Revision Number> is
additional information (i.e. part number if applicable.)
Expansion Slot Information
Option Board Installed
Legacy Parallel (Centronics, DP Short, DP Long)
Ethernet (any speed) or Token Ring
empty or unknown board
IBM front end board
Selecting this option will print the current settings of the printer.
Press the Clear key to stop printing. The following two pages, are a
sample printout of the status page, reflecting the factory default
settings with standard software installed.
Board Identifier
Leg1: or Leg2:
Net1: or Net2:
Exp1: or Exp2:
Fep1: or Fep2:
42
GEK-00028C