Ff Endbuff; Null Sup; Ff Pos - Genicom GEK-00027C User Manual

FF EndBuff

Coax Compat
FF EndBuff
FF EndBuff
LN 1<

Null Sup

Coax Compat
Null Sup
Null Sup
LC/NSCS<

FF Pos

Coax Compat
FF Pos
FF Pos
CPP=1<
GEK-00028C
The FF End Buff option is used to select the action taken if a form
feed is received by the printer and it is the last character in the IBM
print buffer. When set to LN 2, the current print position after the
form feed will be the first column on line two of the next form. If set
to LN 1, the current print position will be the first column on line one
of the next form.
1. While in the Coax Compat menu, press the ◄ (left) or ► (right)
menu browse keys until FF EndBuff is displayed in the lower right
corner of the display.
2. Press the ▼ (down) menu browse key to access the FF EndBuff
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
If Null Sup (Null Suppression) is enabled and formatted data is
received from the host (ignore NL, EM, CR and print spaces instead),
then all lines consisting entirely of nonprintable characters (nulls,
attributes, and non-display or non-print fields) will be printed as
blank lines and a new line executed at the end of the line. The print
position after such a line will be on the next line, column one.
1. While in the Coax Compat menu, press the ◄ (left) or ► (right)
menu browse keys until Null Sup is displayed in the lower right
corner of the display.
2. Press the ▼ (down) menu browse key to access the Null Sup
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
This enables/disables FF Pos (Form Feed Position). Form feed
commands may be executed anywhere or treated as blanks if they do
not occur at MPP+1, the first print position of a line (column one).
1. While in the Coax Compat menu, press the ◄ (left) or ► (right)
menu browse keys until FF Pos is displayed in the lower right
corner of the display.
2. Press the ▼ (down) menu browse key to access the FF Pos
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
121
Chapter 5. Using the Set Up Menu