Genptropts; Slew Rate - Genicom GEK-00027C User Manual

Set Up

GenPtrOpts

GenPtrOpts
Group 1
Group 1
01<
Modify Format

Slew Rate

Slew Rate
Normal<
5180 User's Manual
GENPTROPTS
This menu is used to set general printer options. See the General
Printer Options, Group 1 and Group 2 on pages 179 and 180 in
Appendix G for additional information.
To print the Euro currency symbol, see the General Printer
Options, Group 1 and Group 2 on pages 179 and 180 in Appendix
G for settings.
1. While in the Set Up menu, press ◄ (left) or ► (right) menu browse
key until GenPtrOpts is displayed in the lower right corner of the
LCD.
2. Press the ▼ (down) menu browse key to access the GenPtrOpts
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
Group 1 or Group 2 is displayed.
4. Press the Select key to select Group 1 or Group 2.
5. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to either enable or
disable an option. The < symbol will immediately follow an
enabled option.
Slew Rate
This menu is used to set the speed at which paper can be moved
through the printer during printing operations (form feeds, vertical
moves, etc.) The reduced slew speed can be useful if the printer is
experiencing trouble with heavy stock or stiff multi-part forms. Using
the reduced slew speed will reduce throughput.
1. While in Modify Format menu, press the ◄ (left) or ► (right) menu
browse keys until Slew Rate is displayed in the lower right corner
of the LCD.
2. Press the ▼ (down) menu browse key to access the Slew Rate
options. Slew Rate will now be displayed in the upper left corner
of the LCD.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
selection is displayed.
4. Press the Select key to select the Slew Rate option. The
will now immediately follow the saved Slew Rate option.
Note
68
<
symbol
GEK-00028C