Fx286E; Proprinter - Genicom GEK-00027C User Manual

FX286E

Emul Settings
FX286e
FX286e
Options
FX286e
01

Proprinter

Emul Settings
Proprinter
Proprinter
Options
Proprinter
01
5180 User's Manual
This menu configures the Epson FX286e emulation. See the FX286e
table on page 186 in Appendix G for additional information.
1. While in the Emul Settings menu, press the ◄ (left) or ► (right)
menu browse key until FX286e is displayed in the lower right
corner of the LCD.
2. Press the Select key to access the settings for FX286e. FX286e will
be displayed in the upper left corner of the LCD and Options will
be displayed in the lower right corner.
3. Press the Select key to access the options menu.
4. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable a
FX286e setting. The < symbol will immediately follow an enabled
setting.
5. Press the Clear, or ▲ (up) menu browse, key to exit this option.
This menu configures the IBM Proprinter emulation. See the
Proprinter III XL table on page 185 in Appendix G for additional
information.
1. While in the Emul Settings menu, press the ◄ (left) or ► (right)
menu browse key until Proprinter is displayed in the lower right
corner of the LCD.
2. Press the Select key to access the settings for Proprinter.
Proprinter will be displayed in the upper left corner of the LCD
and Options will be displayed in the lower right corner.
3. Press the Select key to access the options menu.
4. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable a
Proprinter setting. The < symbol will immediately follow an
enabled setting.
5. Press the Clear, or ▲ (up) menu browse, key to exit this option.
126
GEK-00028C