Beeper - Genicom GEK-00027C User Manual

5180 (55 dBa) Cabinet
Model Control Panel

Beeper

5180 User's Manual
The 5180 (55 dBa) Cabinet Model control panel looks slightly
different with the LCD display, keys and LED indicators located in
different locations than the 52 dba model, but the functionality is the
same.
The control panel mount on the 5180 (55 dBa) Cabinet Model is
stationary and does not tilt forward.
The control panel beeper sounds momentarily when:
A key is pressed.
•
A BEL control code is received. (The host can send a "bell" code to
•
sound the printer's beeper. For more information, see the
Programmer's Manual.)
A PAPER LOW condition exists.
•
An EVFU loading error occurs. (For more information on the
•
EVFU, see the Programmer's Manual.)
A hard fault occurs. (See Chapter 7 for an explanation of hard
•
faults.)
Note
14
GEK-00028C