Table of Contents
Advertisement
IGP
Form Length=0
Form Length=0
Normal<
IGP
Ignore Term
Ignore Term
Disable<
GEK-00028C
Form Length=0
With Normal enabled, the printer will logically advance by the <FF>
command after processing an execution command. This is the default
factory-set condition. The user may set this option to Ignore and the
printer will not logically advance by the <FF> command.
1. While in the IGP menu, press the ◄ (left) or ► (right) menu
browse key until Form Length=0 is displayed in the lower right
corner of the LCD.
2. Press the ▼ (down) menu browse key to access the Form
Length=0 options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
Ignore Term
Two IGP commands are effected by the Ignore Term option; IGOFF
and SFOFF each with a following <CR>, <LF> or <CR><LF>. The
Ignore Term option setting effects the vertical position integrity of the
resulting print out. If the Ignore Term option is disabled, the trailing
<LF> will be executed (i.e. the paper will be logically advanced by the
<LF> command). This is the default factory-set condition. If the
Ignore Term option is enabled, the trailing <LF> will not be executed
(i.e. the paper will not be logically advanced by the <LF> amount.
1. While in the IGP menu, press the ◄ (left) or ► (right) menu
browse key until Ignore Term is displayed in the lower right corner
of the LCD.
2. Press the ▼ (down) menu browse key to access the Ignore Term
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
97
Chapter 5. Using the Set Up Menu
Advertisement
Table of Contents
Troubleshooting
