Override All; Hex Print - Genicom GEK-00027C User Manual

IBM Format

Override All

Override All
Disable<
IBM Format

Hex Print

Hex Print
Disable
GEK-00028C
Override All
This enables/disables the Override All option. When enabled, the
printer will override (ignore) any host-SCS commands which attempts
to change the values of Code Page, LPI, CPI, MPP, or MPL. Operator-
set values will be used. When disabled, the individual override
options control Code Page, LPI, CPI, MPP, or MPL.
1. While in the IBM Format menu, press the ◄ (left) or ► (right)
menu browse key until Override All is displayed in the lower right
corner of the LCD.
2. Press the ▼ (down) menu browse key to access the Override MMP
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
Hex Print
This enables/disables the Hex Print option. Hex Print is used to
troubleshoot communications or applications program problems. The
received EBCDIC data stream is converted to hex dump format and
printed. The printout can aid in determining what the printer is being
instructed to do by the data stream.
1. While in the IBM Format menu, press the ◄ (left) or ► (right)
menu browse key until Hex Print is displayed in the lower right
corner of the LCD.
2. Press the ▼ (down) menu browse key to access the Hex Print
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
111
Chapter 5. Using the Set Up Menu