How To Load Paper; Loading Paper Into The Bypass Tray; Applicable Paper Types - Konica Minolta bizhub C300i Quick Manual

6
2
Slide the Lateral Guide to fit the size of the loaded
paper.
3
Load paper into the tray with the print side facing
up.
4
When loading paper other than plain paper, specify
the paper type as needed.
% The paper type is automatically detected by the
optional Intelligent media sensor.
% If you make settings so that the paper type is
not automatically detected, you need to specify
the paper type.
% For details on the above, refer to the HTML Us-
er's Guide.
6.2.2 Loading paper into the Bypass
Tray
When selecting a paper size other than for paper trays or
printing on envelopes or transparencies, use the Bypass
Tray.
To use the Bypass Tray, specify the paper type and pa-
per size.

Applicable paper types

Plain paper, single-side-only paper, special paper, thick
paper, postcard (4 e 6 (A6 Card)), transparency, letter-
head, colored paper, envelope, label sheets, index paper,
recycled paper, and banner paper
24

How to load paper

1
Open the Bypass Tray.
% To load large-sized paper, pull out the Tray Ex-
tension.
NOTICE
Be careful not to touch the surface of the Paper Feed
Rollers with your hand.
2
Load paper with the print side facing down, then
align the Lateral Guide to the paper.
% Insert paper into the tray until their edges are
pressed against the back.
NOTICE
Do not load an excessive number of sheets such that the
top of the stack is higher than the
If paper is curled, flatten it before loading it.
3
Specify the paper type and paper size as needed.
% The paper type is automatically detected by the
optional Intelligent media sensor.
% If you make settings so that the paper type is
not automatically detected, you need to specify
the paper type.
% For details on the paper size setting method and
the above, refer to the HTML User's Guide.
,
mark.
bizhub C360i/C300i/C250i