Cleaning The Color Toner Density Sensors - Xerox WorkCentre6655 User Manual

Maintenance
10. To lock the waste cartridge, turn the waste cartridge lock lever 90-degrees clockwise.
11. Close the side door.

Cleaning the Color Toner Density Sensors

1. Turn off the printer.
CAUTION:
If the optional Productivity Kit (HD) is not installed, ensure that the Ready LED is off
before you turn off the printer. The data in the memory is cleared when the printer is turned off.
2. Push down on the rear door release and pull open the door.
176 Xerox WorkCentre
®
User Guide
6655 Color Multifunction Printer
®