Cleaning Additional Sensors - Xerox 4635 Operator's Manual

MAINTENANCE TASKS
11-12
2. Apply a small amount of lens and mirror cleaner to a cleaning
pad.
3. Wipe the sensor and mirror gently with the cleaning pad.
Figure 1-17. Areas to clean
4. Close the printer doors.

Cleaning additional sensors

There are additional sensors which you should clean when
directed by the Xerox Customer Support Center personnel. To
clean the sensors, follow this procedure:
1. Brush or wipe the sensor window lightly.
2. Remove any paper dust present in the area.
Note: If the sensor is very dirty, you may use a small amount of
alcohol on a swab to clean it.
CAUTION: Do not use any abrasive materials or stronger solvents
on the sensor.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE