Replacing The Dry Ink Waste Container - Xerox 4635 Operator's Manual

Replacing the dry ink waste container

XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
Follow this procedure to replace the dry ink waste container:
1. Open the right and left doors of the printer and locate the
dry ink waste container.
Figure 11-5. Locating the dry ink waste container
2. Place a drop cloth on the floor under the dry ink waste
container area.
CAUTION: To prevent dry ink spills, do not tip or tilt the
waste container.
3. Pull the full waste container out of the printer.
Figure 11-6. Removing the full waste container
4. Remove the cap from the top of the full waste container.
MAINTENANCE TASKS
11-5