Original Type (Selecting The Document Type); Original Width (Scanning To Copy Documents In Maximum Width); Lighten / Darken (Adjusting Copy Density) - Xerox Wide Format 6705 System User Manual

2.13.4
This function is equivalent to that displayed for [Original Type] on the [Image Quality] screen.
For more information, refer to "Original Type (Selecting the Document Type)" (p. 108).

Refer
2.13.5
2
This function is equivalent to that displayed for [Original Width] on the [Layout Adjustment] screen.
For more information, refer to "Original Width (Scanning to Copy Documents in Maximum Width)" (p. 113).

Refer
2.13.6
Copy density can be adjusted among nine levels. Move
the density.
This function can also be set using [Lighten / Darken] on the [Advanced Settings] screen.

Note
Steps
St
1.
Adjust copy density using [
2.13 [Copy (Manual Mode)] Screen
106

Original Type (Selecting the Document Type)

Original Width (Scanning to Copy Documents in Maximum Width)

Lighten / Darken (Adjusting Copy Density)

] and [
leftward to increase the density and rightward to decrease
].