Paper Type - Xerox ColorQube 8580 System Administrator Manual

Paper Type

This table lists the most common PCL commands for supported paper types. For information on
supported paper types and trays, from the printer control panel, print the Paper Tips page.
Paper Type
Plain
Cardstock
Transparency
Lightweight Cardstock
Envelopes
Labels
Letterhead
Glossy
Colored Paper
Pre-Printed
Pre-punched
Custom
Input Trays
The following table lists the most common PCL commands for the input trays supported by your printer.
If the optional input tray is not installed, the alternate tray is used.
Note: If there is more than one command available for the function, you can select any command
listed.
Input Tray Options
Tray 1
Tray 1 in multi-sheet mode
Tray 1 in manual feed mode
Tray 2
Tray 3
PCL 5 Command
<Esc>&n6WdPaper
<Esc>&n10WCardStock
<Esc>&n13WdTransparency
<Esc>&n14WdThinCardStock
<Esc>&n9WdEnvelope
<Esc>&n6WdLabel
<Esc>&n11WdLetterhead
<Esc>&n12WdCoatedPaper
<Esc>&n13WdColoredPaper
<Esc>&n11WdPreprinted
<Esc>&n11WdPrepunched
<Esc>&n12WdCustomType 1 through
<Esc>&n12WdCustomType 5
PCL 5 Command
There is no corresponding
command for this option.
<Esc>&l4H
<Esc>&l6H
<Esc>&l2H
<Esc>&l3H
<Esc>&l1H
<Esc>&l5H
<Esc>l23H
Xerox
Alternate Tray
Not all printer models support this
feature.
Not all printer models support this
feature.
Not all printer models support this
feature.
Not all printer models support this
feature.
Tray 2
®
ColorQube 8580/8880 Color Printer
System Administrator Guide
Printer Commands
89