Managing the system
Setting file protection
3-14
•
Place the two labels in the recessed areas of the cartridge as
shown below:
1. Customer label on top
2. Volume and serial number label on the side opposite the
thumbwheel
•
Write on labels with markers that do not smear.
•
Use only labels that leave no residue when removed.
To make a tape read-only, turn the thumbwheel on the side of the
cartridge until a white dot appears in the window.
To enable writing to the tape, turn the thumbwheel until the dot is
not visible.
Figure 3-2. File protection dot
Operator Guide