Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 507

2. Select a switch from Available Switches.
3. Choose one of the following options:
4. Prohibit a connection between two ports by clicking the intersection point between the ports.
5. Repeat step 4 as needed to create the matrix you want to apply. If you want to change a
6. When you have completed the matrix, click Save if you started with a new matrix, or Save As to
7.
8. Click Close on the Configure Allow/Prohibit Matrix dialog box.
DCFM Enterprise User Manual
53-1001775-01
Two default configurations (Active and IPL) are displayed in a tree structure below the switch.
Existing configurations are also displayed.
•
Double-click a configuration file.
•
Select a configuration file and click the right arrow.
A matrix displays. The switch ports are displayed on both the vertical axis and horizontal
axis. A green circle icon ( ) indicates communication is allowed between the ports.
FIGURE 198
Active Configuration
A prohibit icon ( ) displays at the intersection point. If you know the port addresses of the
ports for which you want to prohibit or allow communication and do not want to search the
matrix for the exact port intersection point, use the procedure
manually" on page 470.
selection from prohibit to allow, click the intersection point to clear the prohibit icon.
save a copy of an existing matrix.
Click Analyze Zone Conflicts.
This operation can be done before or after a configuration is saved. This operation checks the
current zoning settings for conflicts with settings in the PDCM matrix. Zone conflict is analyzed
against the switch for port zoning only. The table cells display in the red background if the two
ports are not in the same zone in an active zone configuration.
Configuring a PDCM Allow/Prohibit Matrix
"Configuring an Allow/Prohibit
18
469