Replicating Security Configurations; Device Properties; Viewing Properties - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

8

Replicating security configurations

Replicating security configurations
You can replicate an AD/LDAP Server, DCC, IP, RADIUS Server, or SCC security policy.
Right-click a device in the Product List or the Connectivity Map, and select Configuration >
Replicate > Security.
A wizard is launched to guide you through the process.

Device properties

You can customize the device Properties dialog boxes to display only the data you need by adding,
editing, and deleting property labels. You can also edit property fields to change information.

Viewing properties

To view the properties for a device or fabric, complete the following step.
Right-click any product icon and select Properties.
The Properties dialog box displays, with information related to the selected device (such as,
switches, directors, HBAs, trunks, tunnels, and nodes).
Depending on the device type, any of the following port tabs may display:
•
•
•
•
•
•
•
•
•
Depending on the device type, some of the properties listed in the following table may not be
available for all products.
TABLE 10
Field/Component
Addressing Mode
Back to Edge Routing Support
Bandwidth
Capability
Compression
Connected Virtual FCoE Port
Contact
192
FC Ports
GigE Ports
IP Ports
iSCSI Ports
POM
Remote Ports
SFP
Virtual Sessions Ports
Virtual FCoE Ports
Device properties
Description
The addressing mode of the switch.
Whether back to edge routing is supported.
The bandwidth of the FCIP tunnel.
The node capability.
Whether compression is On or Off for the FCIP tunnel.
The fabric name, switch name, and virtual FCoE port number of the
connected virtual FCoE port.
The primary contact at the customer site.
DCFM Enterprise User Manual
53-1001775-01