19
Configuring routing domain IDs
Configuring routing domain IDs
Logical (phantom) domains are created to enable routed fabrics. A logical domain called a front
domain is created in edge fabrics for every IFL. A logical domain called a translate (Xlate) domain is
created in routed fabrics that share devices.
Use the following procedure to change the domain IDs of these logical domains.
1. Right-click the fabric for which you want to configure phantom domains, and select Routing
2. Right-click anywhere in the Available Switches table and select Expand All to expand the switch
3. Select a logical domain, and click the right arrow to move the switch to the Selected Switches
4. Select a domain ID number from the Domain ID list, which lists unused domain IDs.
5. Click OK.
492
Domain IDs.
The Configure Routing Domain IDs dialog box is displayed
FIGURE 207
Configure Routing Domain IDs dialog box
group for the fabric to display the FCR logical domains.
table.
You may need to scroll right or drag the dialog box open further to see the Domain ID column.
(Figure
207).
DCFM Enterprise User Manual
53-1001775-01