Configuring Brocade Hba Credentials - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

8. Click OK on the Add Host Discovery dialog box.
9. Click Close on the Discover Setup dialog box.

Configuring Brocade HBA credentials

To configure credentials for a Brocade HBA, complete the following steps.
1. Select Discover > Setup.
2. Click Add Host.
3. Discover a host.
4. Click the Host Credentials tab.
5. Select the Discover Brocade HBAs in the hosts check box, if necessary.
6. Enter the HCM Agent port number in the Brocade HBAs - Port field if necessary.
7.
8. Click OK on the Add Host Discovery dialog box.
9. Click Close on the Discover Setup dialog box.
DCFM Enterprise User Manual
53-1001775-01
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
A Host Group displays in Discovered Addresses table with pending status. To update the status
from pending you must close and reopen the Discover Setup dialog box.
The Discover Setup dialog box displays.
The Add Host Discovery dialog box displays.
To discover a host, refer to
"Importing Hosts from a CSV file"
FIGURE 26
Add Host Discovery dialog box - Host Credentials tab
Enter your username and password in the appropriate fields.
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
A Host Group displays in Discovered Addresses table with pending status. To update the status
from pending you must close and reopen the Discover Setup dialog box.
Configuring Brocade HBA credentials
"Discovering Hosts by IP address or hostname"
on page 43, or "Importing Hosts from a Fabric"
2
on page 42,
on page 44.
45