Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 591

5. Click Next.
6. Select the initiator port from the Initiator Port list.
7.
8. Select the LUN from LUN list.
9. If REPL Support was enabled by the Configure Switch Encryption wizard, a New LUN checkbox
10. Click Finish.
11. In environments where there are multiple paths to the same LUNs, it is critical that the same
FIGURE 247
12. Click Add or Apply to apply the modifications.
DCFM Enterprise User Manual
53-1001775-01
The Select Initiator Port dialog box displays.
Click Next.
LUN discovery is launched, and a progress bar displays. There are four possible outcomes:
-
A message displays indicating No LUNs are discovered. Click OK to dismiss the message
and exit the wizard.
-
A message displays indicating LUNs are discovered, but are already configured. Click OK to
dismiss the message and exit the wizard.
-
A message displays indicating that the target is not in the right state for discovering LUNs.
Click OK to dismiss the message and exit the wizard.
-
The Select LUN dialog box displays, showing discovered LUNs that are available.
is presented and enabled by default. If this LUN is to be paired with another LUN for SRDF data
replication, the New LUN option must be enabled by selecting this checkbox. Refer to
"Metadata requirements and remote replication"
If REPL support was not enabled, this checkbox is not displayed.
The new LUN path is added to the Encryption Disk LUN view.
LUN policies are configured on all instances of the LUN. Be sure to return to the Encryption
Disk LUN view to determine of there are configuration mismatches. Check under Encryption
Mode for any entries showing Mismatch. You can correct the mismatch by clicking on the
incorrect mode to display the choices, and selecting the correct mode
Correcting an Encryption Mode Mismatch
When you correct a policy on a LUN, it is automatically selected for all paths to the selected
LUN. When you modify LUN policies, a Modify icon appears to identify the modified LUN entry.
Adding target disk LUNs for encryption
for information about how this option works.
20
(Figure 247).
553