Listing Zone Members; Removing A Member From A Zone - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

22

Listing zone members

Listing zone members
Use this procedure to identify the zone in the active zone configuration of the fabric to which an
individual port belongs and the members of that zone.
Note that the procedure is performed from the main view of the Management application.
1. On the product device list of the Management application, expand the list of products to show
2. Select a port and select Configure > List Zone Members.
3. Click Close to exit the List Zone Members dialog box.

Removing a member from a zone

Use the following procedure to remove one or more members from a zone or zones. Note that the
member is not deleted; it is only removed from the zone.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
4. Click the plus sign (+) by the appropriate zone in the Zones list to expand the listing and show
5. Perform one of the following actions:
6. Click OK or Apply to save your changes.
648
the ports.
If the port is not a member of a zone, a message displays informing you of this. Click OK to
close the message.
If the port is a member of a zone, the List Zone Members dialog box displays. The fabric's
name, the port's name, and the WWN zone members display.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
the zone's members.
•
Right-click the name of the zone member you want to remove in the Zones list and select
one of the following options from the shortcut menu that displays:
•
Remove - To remove the zone member from the selected zone.
•
Remove All - To remove the zone member from all zones to which it belongs.
•
To remove multiple zone members, select the members to be removed from the zone, and
click the left arrow between the Potential Members list and the Zones list.
When successful, the zone member is removed from the Zones list.
A message displays informing you that any zones or zone configurations you have changed will
be saved in the zone database, and warning you to make sure no other user is making changes
to the same areas.
DCFM Enterprise User Manual
53-1001775-01