Overwriting an assigned event filter
A device can only have one event filter at a time; therefore, when a new filter is applied to a device
that already has a filter, you must confirm the new filter assignment.
To overwrite an event filter, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
2. Select the event filter you want to apply in the Call Home Event Filters table.
3. Select the devices to which you want to apply the event filter in the Call Home Centers table.
4. Click the right arrow button.
5. Click Yes.
6. Click OK to close the Call Home dialog box.
Removing an event filter from a call home center
To remove all event filters from a call home center, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
2. Choose one of the following options in the Call Home Centers table:
3. Click OK to close the Call Home dialog box.
DCFM Enterprise User Manual
53-1001775-01
The Call Home dialog box displays.
For more information about Call Home events, refer to
For existing event filters, a confirmation messages displays.
The selected event filter is applied to the selected devices. The event filter displays beneath
the specified device or all of the devices under the specified call home center.
The Call Home dialog box displays.
•
Right-click a call home center and select Remove Filters.
•
Select the call home center and click the left arrow button.
All event filters assigned to the call home center are removed.
Overwriting an assigned event filter
Appendix B, "Call Home Event
4
Tables".
121