3
Restoring data to a new server
Restoring data to a new server
If your Management application server fails and you must recover information to a new server,
restore the data (Refer to
Display
You can configure the display for FICON and reset the display to the default settings.
Setting your FICON display
FICON display setup rearranges the columns of any table that contains end device descriptions to
move the following eight columns to be the first columns: FC Address, Serial #, Tag, Device Type,
Model, Vendor, Port Type, and WWN.
To set the FICON display, complete the following steps.
1. Select Server > Options.
FIGURE 30
2. Select Display in the Category list.
3. Click Set Up FICON Display.
4. Click Apply or OK to save your work.
68
"Restoring data"
The Options dialog box displays
Options dialog box (Display option)
All tables that contain end device descriptions display the following columns as the first eight
columns: FC Address, Serial #, Tag, Device Type, Model, Vendor, Port Type, and WWN.
on page 67 for complete instructions).
(Figure
30).
DCFM Enterprise User Manual
53-1001775-01