Adding An Invalid Crcs Threshold - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Adding an Invalid CRCs threshold

NOTE
This threshold is only available for Fabric OS devices.
To add an Invalid CRCs threshold, complete the following steps.
1. Select Configure > Port Fencing.
2. Select Invalid CRCs (Fabric OS only) from the Violation Type list.
3. Click Add.
4. Enter a name for the threshold in the Name field.
5. Select one of the following options:
6. Enter the number of invalid CRCs allowed for the threshold in the Threshold errors field.
7.
8. Click OK to add the Invalid CRCs threshold to the table and close the Add Invalid CRCs
9. Click OK on the Port Fencing dialog box.
DCFM Enterprise User Manual
53-1001775-01
The Port Fencing dialog box displays.
The Add Invalid CRCs Threshold dialog box displays.
FIGURE 126
Add Invalid CRCs Threshold dialog box
•
Default—Uses device defaults. Go to
•
Custom—Uses your selections. Continue with
Select the time period for the threshold from the errors per list. The following choices are
available:
•
None—the port is blocked as soon as the specified number of invalid CRCs allowed is met.
•
Second—the port is blocked as soon as the specified number of invalid CRCs allowed is
reached within a second.
•
Minute—the port is blocked as soon as the specified number of invalid CRCs allowed is
reached within a minute.
•
Hour—the port is blocked as soon as the specified number of invalid CRCs allowed is
reached within a hour.
•
Day—the port is blocked as soon as the specified number of invalid CRCs allowed is
reached within a day.
Threshold dialog box.
To assign this threshold to fabrics, switches, or switch ports, refer to
page 339.
Adding an Invalid CRCs threshold
step 8.
step 6.
13
"Assigning thresholds" on
331