Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 78

2
Configuring SNMP credentials
5. Select the SNMP version from the SNMP Version list.
6. Specify the Read option by selecting Default 'public' or Custom.
7.
8. Specify the Write option by selecting Default 'private' or Custom.
9. If you selected Custom, enter the community string in the Custom and Confirm Custom fields.
10. If you are configuring a 256-Port director, select the Configure for 256-Port_Director_Name
FIGURE 22
11. Enter a user name in the User Name field.
12. Enter a context name In the Context Name field.
13. Select the authorization protocol in the Auth Protocol field.
14. Enter the authorization password in the Auth Password field.
15. Select the privacy protocol in the Priv Protocol field.
16. Enter the privacy password in the Priv Password field.
17. Click OK on the Address Properties dialog box.
40
•
If you selected v1, continue with step 6.
•
If you select v3, the SNMP tab displays the v3 required parameters. Go to step 10.
To discover a Virtual Fabric device, you must configure SNMP v3 and your SNMP v3 user
account must be defined as a Fabric OS switch user.
If you selected Custom, enter the community string in the Custom and Confirm Custom fields.
Go to step 21.
check box.
•
If you selected Configure for 256-Port_Director_Name, go to step 14.
•
If you did not select Configure for 256-Port_Director_Name, continue with step 11.
Address Properties dialog box (SNMP Tab - v3)
•
If you selected Configure for 256-Port_Director_Name, go to step 17.
•
If you did not select Configure for 256-Port_Director_Name, continue with step 15.
If the seed switch is not partitioned, continue with
If the seed switch is partitioned, the Undiscovered Seed Switches dialog box displays.
step 18.
DCFM Enterprise User Manual
53-1001775-01