Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 198

7
Configuring a Radius server
1. Select the Authentication tab
2. For Primary Authentication, select Radius Server.
3. Click Add.
4. Enter the radius server's IP address in the IP Address field.
5. Enter the TCP port used by the Radius server in the TCP Port field.
6. Select the authentication policy (PAP or CHAP) from the Authentication Type field.
7.
8. Enter the timeout timer value (in seconds) that specifies the amount of time to wait between
9. Enter the number of attempts to be made to reach a server before assuming it is unreachable
160
FIGURE 68
Authentication tab
The Add or Edit Radius Server dialog box displays
FIGURE 69
Add or Edit Radius Server
Enter the shared secret in the Shared Secret and Confirm Secret fields.
retries when the server is busy in the Timeout (Sec) field.
in the Attempts field.
(Figure 68).
(Figure 69).
DCFM Enterprise User Manual
53-1001775-01