Configuring A Brocade Group On Skm - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

20

Configuring a Brocade group on SKM

•
•
•
•
•
•
These steps are described in more detail in the following sections.
Configuring a Brocade group on SKM
A Brocade group is configured on SKM for all keys created by Brocade encryption switches and
blades. This needs to be done only once for each key vault.
1. Login to the SKM management web console using the admin password.
2. Select the Security tab.
3. Select Local Users & Groups under Users and Groups.
4. Select Add under Local Users.
5. Create a Brocade user name and password.
6. Select the User Administration Permission and Change Password Permission check boxes.
7.
8. Select Add under Local Groups.
9. Add a Brocade group under Group.
10. Select Save.
11. Select the new Brocade group name, and then select Properties.
12. In the User List section, select or type the Brocade user name under Username.
13. Select Save.
NOTE
Fabric OS version 6.2.0 uses brcduser1 as a standard user name when creating a Brocade group
on SKM. If you downgrade to version 6.2.0, the user name is overwritten to brcduser1, and the
Brocade group user name must be changed to brcduser1.
512
Download the CA certificate.
Create and install an SKM server certificate.
Enable an SSL connection.
Configure a cluster of SKM appliances for high availability.
Export and sign the encryption node certificate signing requests.
Import the signed certificates into the encryption node.
The User & Group Configuration page displays.
Select Save to save this user data.
Local Group Properties and a User List are displayed.
The Brocade user name and password are now configured on SKM.
DCFM Enterprise User Manual
53-1001775-01