Configuring An Fcip Tunnel - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Configuring an FCIP tunnel

When you configure an FCIP extension connection, you create FCIP tunnels and FCIP circuits,
between two extension switches.
1. Select Configure > FCIP Tunnels.
FIGURE 153
2. Select the switch you want to configure under Devices.
DCFM Enterprise User Manual
53-1001775-01
The FCIP Tunnels dialog box is displayed
switches are listed under devices.
FCIP Tunnels dialog box
Configuring an FCIP tunnel
(Figure 153). All discovered fabrics with extension
16
391