Configuring An Allow/Prohibit Manually - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

18

Configuring an Allow/Prohibit manually

Configuring an Allow/Prohibit manually
NOTE
If you receive a 'FICON not supported on switch' error, refer to FICON troubleshooting for a list of
possible causes.
To configure to allow or prohibit communication between specific ports manually, complete the
following steps.
1. Select Configure > Allow/Prohibit Matrix.
2. Select a switch from Available Switches.
3. Choose one of the following options:
4. Click Manual Allow/Prohibit.
5. Select one of the following options
6. Enter the port number of the first port for which you want to allow or prohibit communication in
7.
470
The Configure Allow/Prohibit Matrix dialog box displays.
Two default configurations (Active and IPL) are displayed in a tree structure below the switch.
Existing configurations are also displayed.
•
Double-click a configuration file.
•
Select a configuration file and click the right arrow.
A matrix displays. The switch ports are displayed on both the vertical axis and horizontal
axis. A green circle icon ( ) indicates communication is allowed between the ports.
The Manual Allow/Prohibit dialog box displays.
FIGURE 199
Manual Allow/Prohibit dialog box
•
Select Allow to allow communication between two specific ports.
•
Select Prohibit to prohibit communication between two specific ports.
the Port Address 1 field.
Enter the port number of the second port for which you want to allow or prohibit
communication in the Port Address 2 field.
DCFM Enterprise User Manual
53-1001775-01