Security tab
The Security tab
NOTE
You must enable encryption engines before you back up or restore master keys.
Master key actions are as follows:
•
•
•
See
NOTE
Encryption is not allowed until the master key has been backed up.
FIGURE 261
DCFM Enterprise User Manual
53-1001775-01
(Figure
261) displays the status of the master key for the encryption group.
Create a new master key, which is enabled when no master key exists or the previous master
key has been backed up.
Back up a master key, which is enabled any time a master key exists.
Restore a master key, which is enabled when either no master key exists or the previous
master key has been backed up.
"Master keys"
on page 559 for complete information about managing master keys.
Encryption Group Properties - Security tab
20
Security tab
583