Removing An Advanced Event Filter - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

10

Removing an advanced event filter

6. Click OK.
7.
Removing an advanced event filter
To remove an advanced event filter, complete the following steps.
1. Click the Filter hyper link in the Master Log.
2. Click Advanced Filtering.
3. Click the Include Events tab, if necessary.
4. Select the filter you want to remove from the Additional Filters - Include these Events table.
5. Click Remove.
6. Click Yes on the 'remove the filters' message.
7.
8. Click OK to close Define Filter dialog box.
256
c. Click the right arrow button to move the event type to the Additional Filters - Filter out these
Events table.
NOTE
You can configure a maximum of 10 filters to be excluded.
The Define Filter dialog box displays.
Click OK to close Define Filter dialog box.
The Define Filter dialog box displays.
The Advanced Event Filtering dialog box displays.
NOTE
You can configure a maximum of 10 filters each on the Include Events tab and Exclude Events
tab.
Click OK to close the Advanced Event Filtering dialog box.
The Define Filter dialog box displays.
DCFM Enterprise User Manual
53-1001775-01