Importing Hosts From A Csv File - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

9. Click OK on the Add Host Discovery dialog box.
10. Click Close on the Discover Setup dialog box.

Importing Hosts from a CSV file

To discover Hosts by importing a CSV file, complete the following steps.
1. Select Discover > Setup.
2. Click Add Host.
3. Click Import.
4. Browse to the CSV file location.
5. Click Open.
6. Verify the imported values in the Host List text box.
DCFM Enterprise User Manual
53-1001775-01
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
A Host Group displays in Discovered Addresses table with pending status. To update the status
from pending you must close and reopen the Discover Setup dialog box.
The Discover Setup dialog box displays.
The Add Host Discovery dialog box displays.
FIGURE 24
Add Host Discovery dialog box - Host tab
The Open dialog box displays.
The CSV file must meet the following requirements:
•
Comma separated IP address or host names
•
No commas within the values
•
No escaping supported
For example, XX.XX.XXX.XXX, XX.XX.X.XXX, computername.company.com
The CSV file is imported to the Add Host dialog box. During import, duplicate values are
automatically dropped. When import is complete, the imported values display in the Host list
text box. If the file cannot be imported, an error displays.
Importing Hosts from a CSV file
2
43