Viewing Port Connection Properties - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

8

Viewing port connection properties

Viewing port connection properties
You can view the information about products and ports on both sides of the connection.
1. Right-click the connection between two end devices on the Connectivity Map and select
2. Review the following information:
TABLE 15
Field
Product Properties table
Connections table
216
Properties.
OR
Double-click the connection between two devices on the Connectivity Map.
The Connection Properties dialog box displays.
NOTE
If one of the devices is in an unknown state, the Product 1 and Product 2 information displays;
however, the Connections table information does not display.
•
Product properties for both devices.
•
Connection properties.
•
Selected connection port properties.
Depending on the device type at either end of the connection, some of the following fields
(Table 15) may not be available for all products.
Port connection properties
Domain ID
Fabric Name
IP Address
Switch Name
WWN
1-Port #
1-Port Type
1-WWPN
1-MAC Address
1-IP Address
1-Trunk
1-Speed (Gbps)
2-Port #
2-Port Type
2-WWPN
2-MAC Address
Description
The product information for the two connected switches.
The domain ID of the selected switch and product in xxs(yy) format,
where xx is the normalized value and yy is the actual value.
The world wide name of the fabric.
The IP address of the switch.
The name of the switch.
The world wide name of the switch.
One row for each circuit.
The port number of the first switch.
The port type of the first switch.
The world wide port number of the first switch.
The media access control (MAC) address of the first switch.
The IP address of the first switch.
Whether there is a trunk on the first switch.
The speed of the first switch.
The port number of the second switch.
The port type of the second switch.
The world wide port number of the second switch.
The MAC address of the second switch.
DCFM Enterprise User Manual
53-1001775-01