Turning Flyovers On Or Off; Viewing Flyovers; Names - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

3

Turning flyovers on or off

7.
Turning flyovers on or off
Flyovers display when you place the cursor on a product. They provide a quick way to view a
product's properties.
To turn flyovers on or off, select Enable Flyover Display from the View menu.

Viewing flyovers

On the Connectivity Map, rest the pointer over a product icon, port, or connection.
The pop-up window containing the product, port, or connection information displays.

Names

You can use Names as a method of providing familiar simple names to products and ports in your
SAN. Using your Management application you can:
•
•
•
•
•
Setting names to be unique
You can edit duplicate names so that each device has a unique name. Note that the Duplicated
Names dialog box only displays when you set names to be unique and there are duplicate names in
the system.
To edit duplicate names, complete the following steps.
1. Select Server > Options.
76
FCoE
•
Name
•
Node WWN
•
MAC
c. Click the right arrow to move the selected properties to the Selected Properties table.
d. Use the Move Up and Move Down buttons to reorder the properties in the Selected
Properties table.
The properties displayed in the Selected Properties table appear in the flyover display.
Click Apply or OK to save your work.
Set names to be unique or non-unique.
Fix duplicate names.
Associate a name with a product or port WWN currently being discovered.
Add a WWN and an associated name for a product or port that is not yet being discovered.
Remove or disassociate a name from a WWN.
The Options dialog box displays
•
Port#
•
Port Type
•
FCoE Index #
(Figure 36).
DCFM Enterprise User Manual
53-1001775-01