Troubleshooting discovery
If you encounter discovery problems, complete the following checklist to ensure that discovery was
set up correctly.
1. Verify IP connectivity by issuing a ping command to the switch.
2. Enter the IP address of the device in a browser to verify the SNMP settings.
DCFM Enterprise User Manual
53-1001775-01
•
New Discovery Pending
•
Created host structure differs from discovered host; Discovery ignored
•
Brocade HBA Discovery Failed: HCM Agent connection failed
•
HCM Agent collection failed
a. Open the command prompt.
b. From the Server, type
For example, http://10.1.1.11.
ping
Switch_IP_Address
Troubleshooting discovery
.
2
49