Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 59

7.
8. Verify your configuration information on the Server Configuration Summary screen and click
9. Complete the following steps on the Start Server screen:
10. Click Yes on the restart server confirmation message.
11. Enter your user name and password.
DCFM Enterprise User Manual
53-1001775-01
f. Click Next.
If you enter a syslog port number already in use, a message displays. Click No on the
message to remain on the Server Configuration screen and edit the syslog port number
(return to step 6a). Click Yes to close the message and continue with step 7.
If you enter a port number already in use, a Warning displays next to the associated port
number field. Edit that port number and click Next.
Complete the following steps on the SMI Agent Configuration screen.
FIGURE 13 SMI Agent Configuration screen
a. Enable the SMI Agent by selecting the Enable SMI Agent check box.
b. Enable the SLP by selecting the Enable SLP check box.
c. Enable the SSL by selecting the Enable SSL check box.
d. Enter the SMI Agent port number in the SMI Agent Port # field (default is 5989).
e. Click Next.
Next.
a. Select the Start SMI Agent check box, if necessary.
b. Select the Start SLP check box, if necessary.
c. Select the Start Client check box, if necessary.
d. Click Finish.
After all of the services (Server, SLP, SMI Agent and Client) are started, the Log In dialog
box displays.
The defaults are Administrator and password, respectively. If you migrated from a previous
release, your user name and password do not change.
Launching the Configuration Wizard
1
21