Removing A Host Server; Enabling Trap Forwarding; Adding An Snmpv1 Destination - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

5. Select a fabric from the Targeted Fabric list.
6. Select a severity (None, Critical, Error, Warning, Info, or Debug) from the Severity list.
7.

Removing a host server

You can remove any host server as the trap recipient on managed Fabric OS devices.
To remove a host server, complete the following steps.
1. Select Monitor > SNMP Setup.
2. Click the Other Recipients tab.
3. Select Remove from the Action list.
4. Click OK on the SNMP Setup dialog box.

Enabling trap forwarding

You can enable trap forwarding on all defined destinations.
To enable trap forwarding, complete the following steps.
1. Select Monitor > SNMP Setup.
2. Click the Trap Forwarding tab.
3. Select the Enable trap forwarding check box.
4. Click OK on the SNMP Setup dialog box.

Adding an SNMPv1 destination

You can only configure six destinations, including v1 and v3 destinations.
To add a V1 destination, complete the following steps.
1. Select Monitor > SNMP Setup.
2. Click the Trap Forwarding tab.
3. Select V1 from the Trap forwarding type list.
DCFM Enterprise User Manual
53-1001775-01
Click OK on the SNMP Setup dialog box.
The SNMP Setup dialog box displays.
The SNMP Setup dialog box displays.
The SNMP Setup dialog box displays.
Removing a host server
10
279